Copalin Primer ZP

Application Guidelines:

Steel; blast cleaned to ISO- SA2½.

Steel must be clean dry free from grease oils, salt contaminations.

Substrate temperature should be at least 3°C above dew point.

For mechanical cleaning steel pretreated according to iso

Stir well before use.

The temperature of the paint should be above 15°C otherwise extra thinner may be required to obtain application.

Too much solvent results in lower sag resistance.

Overcoat Copalin Primer Q/D 130 with Copalin Q/D Enamel 211, or Copa Marine Enamel 700, or Copalin Gloss Enamel 331.

Application technique:

Airless Spray:

Recommended thinner: Copalin thinner 601 (flash point 25°C).

Volume of thinner: approx.0-5%.

Nozzle orifice: approx. 0.38-0.48 mm (=0.015-0.019 inch).

Nozzle pressure: 12-16 mpa.

Air spray:

Thinner 601 (5 – 15% by volume).

Brush/Roller: for touch-up of damaged areas.

(Thinner 601 (0 – 5% by volume).

Recommended thinner: Copalin thinner 601 (flash point 38°C).

Additional information

Gloss	Matt
Color	Grey
Solids Volume	approx 50%±2%
Flash point	32 ◦C
Recommended film thickness	50 µm thickness
Theoretical Spreading Rate	8-9 m2/L, at 50µm
Curing Times(at 25ºC)	Hard Dry: 2-3 hrs, Touch dry: 10-20 min
Recoating Time (at 25◦C)	Min: 2 hrs

Copalin Primer Q/D 130 is supplied in one component. Keep drums tightly sealed until ready for use to prevent atmospheric moisture from contaminating material. Store material at temperatures between 50 – 80°F (10 – 27°C) in a dry well ventilated area. Ensure the material does not freeze. Material has a minimum shelf life of 12 months after the date of manufacture if properly stored.

Copalin Primer Q/D 130 is for industrial use only. Avoid contact with eyes, and skin, do not inhale or ingest. When working with this material wear goggles, rubber gloves and a respirator. When spraying in a confined area, also wear a fresh air hood and make provision for forced ventilation. Refer to MSDS regarding individual components.

Copalin warrants this product to be free of defects in material and workmanship. Copalin's sole obligation and Buyer's exclusive remedy in connection with the products shall be limited, at Copalin's option, to either replace the products not conforming to this Warranty or Credit to Buyer's account in the invoiced amount of the nonconforming products. Any claim under this warranty must be made by the Buyers to Copalin in writing within (5) days of Buyer's discovery of the claimed defect, but in no event later the expiration of the applicable shelf life, or one year from the delivery date, whichever is earlier. Buyer's failure to notify Copalin of such nonconformance as required herein shall bar Buyer from recovery under this warranty.

Copalin makes no other warranties whether express, implied, or statutory, such as warranties of merchantability or fitness for a particular purpose, shall apply. In no event shall Copalin be liable for consequential or incidental damages.

Any recommendations or suggestion relating to the use of the products made by Copalin, whether in its technical literature, or in response to specific inquiry, or otherwise, is based on data believed to be reliable; however, the products and information are intended for use by buyers having requisite skill and know-how in the industry, and therefore it is for Buyer to satisfy itself of the suitability of the products for its own particular use and it shall be deemed that Buyer has done so, at its sole discretion and risk. Variation in environment, changes in procedures of use, or extrapolation of data may cause unsatisfactory results.

Totaly Free Shipping

Orders take 1–2 business days to process before shipping. Once your package leaves our warehouse, delivery will take from 7-12 business days. Returns If for any reason you are unhappy with your purchase, we offer returns within 7 days of delivery. If 7 days have passed since your purchase was delivered, unfortunately, we are unable to offer a credit or exchange.