Product Code: 473
Product Technical Data Sheet
Description
- Two component solvent free coat based on polyamine, for high performance tank lining.
- Has outstanding mechanical and chemical resistance.
- Heavy duty lining coating for chemicals (alkalies and fatty acids) & petrochemical, fertilizers plants and cargo holds in marine structures.
- Extremely favourable as interior coating for sewage & effluent pipes.
- Distinguished protection of textile mill, sugar mill, water purification, liquid urea solutions tanks.
- High performance interior coating for corrosive chemicals steel or concrete tanks.
- Minimal health hazards and no fire hazards at all.
- No limitations for film thickness per one coat.
- Very tough and glossy enamel like finish, easy to clean and sanitized.
- Good adhesion to sand blasted steel or concrete.
- Gloss: Gloss.
- Colour: Grey, Beige.
- Volume Solids, %: 100.
- Flash point, °C: 110.
- Mixing Ratio, by weight: 3:1(base: hardener)
- Pot life, at 25°C, 100 ml: 20 min.
- Recommended film thickness, μm: 150 - 300.
- Theoretical spreading rate, at 150 μm: 6.5 m2/L.
- Theoretical spreading rate for rough concrete use: 500 gm/ m2.