Product Code: 129
Product Technical Data Sheet
Description
- Two component surface tolerant modified epoxy poly amide primer for protective Coating system.
- Good adhesion to steel galvanized steel and nonferrous metal.
- Good water and corrosion resistance.
- Suitable for touching up of damage epoxy coats and weld seams.
- Can be over coated with alkyd, vinyl, and epoxy and polyurethane.
- Suitable on damp or dry blast cleaned substrates.
- It can be applied as a primer by solvent cleaning without blast cleaning.
- Gloss: Egg shell.
- Colour: Reddish brown / Grey and greenish yellow.
- Solid volume, %: 60% ± 2.
- Flash point, C : 26.
- Mixing Ratio, by volume: 3:1 (base: hardener).
- Pot life: 8 hrs.
- Recommended film thickness, μm: 50 - 100.
- Theoretical Spreading Rate at 50μm d.f.t: 12m2/L.